A Multi-point Hoggery's Padding Temperature Measurement System Based on WSN

HUANG Yu-yan; ZHENG Hui-yong; CHEN Yong-kuai; PU Bao-shan; WANG Tao; ZHENG Hong-yi

doi:10.19303/j.issn.1008-0384.2018.02.019

Volume 33 Issue 2

Mar. 2019

Turn off MathJax

Article Contents

Article Navigation > Fujian Journal of Agricultural Sciences > 2018 > 33(2): 212-218

HUANG Yu-yan, ZHENG Hui-yong, CHEN Yong-kuai, PU Bao-shan, WANG Tao, ZHENG Hong-yi. A Multi-point Hoggery's Padding Temperature Measurement System Based on WSN[J]. Fujian Journal of Agricultural Sciences, 2018, 33(2): 212-218. doi: 10.19303/j.issn.1008-0384.2018.02.019

Citation:

HUANG Yu-yan, ZHENG Hui-yong, CHEN Yong-kuai, PU Bao-shan, WANG Tao, ZHENG Hong-yi. A Multi-point Hoggery's Padding Temperature Measurement System Based on WSN[J]. Fujian Journal of Agricultural Sciences, 2018, 33(2): 212-218. doi: 10.19303/j.issn.1008-0384.2018.02.019

Citation:

PDF( 2642 KB)

A Multi-point Hoggery's Padding Temperature Measurement System Based on WSN

doi: 10.19303/j.issn.1008-0384.2018.02.019

Institute of Digital Agriculture, Fujian Academy of Agricultural Sciences, Fuzhou, Fujian, 350003, China

Received Date: 2017-09-07
Rev Recd Date: 2018-02-13
Publish Date: 2018-02-01

Abstract

Abstract

A multi-point temperature measurement system based on wireless sensor network was designed for the hoggery's internal padding temperature measurement. Using STC89C52RC MCU as the core controller, C language as the programming language, complete acquisition nodes and a aggregation node's software and hardware design. Each acquisition node has three temperature sensors DS18B20 to measure the temperatures, using the nRF905 wireless modules to send data to the aggregation node. The aggregation node receive the data and display, it also have alarm function. The aggregation node's MCU use the serial port to communicate with the upper computer, and use VB 6.0 software programming to realize the real time display, storage alarm and data loading functions. Experiments show that the system has high practicability and reliability, and can be used for the other agricultural monitoring systems.
- STC89C52RC,
- multi-point temperature measurement,
- padding temperature measurement,
- wireless transmission,
- NRF905

FullText(HTML)

References(12)

References

[1]	陈永明, 张益书.洛东生物发酵床零排放养猪技术概述[J].猪业科学, 2008, (9):42-44. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dwkxydwyx200809011
[2]	COLLIN A, VAN MILGEN J, LE DIVIDICH J.Modelling the effect of high constant temperature on food intake in young growing pigs.Animal Science.2001, 72:519-527. doi: 10.1017/S1357729800052048
[3]	胡育璐.生物发酵舍垫料温度测量系统的设计[J].福建农机, 2014, (2):41-43. http://www.cqvip.com/QK/95573X/201402/50273122.html
[4]	刘波, 潘志针, 朱育菁, 等.夏季高温阶段微生物发酵床表层稳定分别研究[J].福建农业学报, 2016, 31(10):1098-1103. http://www.cnki.com.cn/Article/CJFDTOTAL-GATE201303024.htm
[5]	林营志, 刘波, 郑回勇, 等.夏季高温季节微生物发酵床大栏猪舍环境参数变化动态[J].福建农业学报, 2015, 30(7):685-692. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fjnyxb201507013
[6]	何侨麟, 甘乾福, 江志华, 等.生物发酵床不同断面温湿度变化与猪舍环境小气候的关联研究[J].中国农学通报, 2012, 28(23):14-17. http://mall.cnki.net/magazine/Article/ZNTB201223006.htm
[7]	ZHAN U, YANG B.Variable length dynamic addressing based on network traffic distribution in wireless sensor networks[J].Frontiers of Electrical and Electronic Engineering in China, 2010, 5(1):43-48. doi: 10.1007/s11460-009-0074-2
[8]	占宇. 基于无线数据传输的多功能温度检测系统的开发[D]. 沈阳: 沈阳理工大学硕士论文, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10144-1011199479.htm
[9]	杨久河. 基于DS18B20的多点式无线温度测量仪的设计与实现[D]. 青岛: 中国海洋大学硕士论文, 2010. http://cdmd.cnki.com.cn/Article/CDMD-10423-1011029323.htm
[10]	陈亮甫, 韩玉杰, 徐凯宏等.基于无线通信技术的多点动态温度测控系统[J].传感器与微系统, 2011, 30(2):81-83. http://www.cnki.com.cn/Article/CJFDTotal-TXDY201404036.htm
[11]	史迩冬, 李清栋, 周雪莉等.基于USB接口的51单片机与PC机通信的方法[J].大众科技, 2008, (11):55-56. doi: 10.3969/j.issn.1008-1151.2008.11.025
[12]	李建辉, 廖桂平, 王访.基于WSN的油菜生长环境数据采集系统[J].湖南农业大学学报:自然科学版, 2013, 39(6):675-682. http://cdmd.cnki.com.cn/Article/CDMD-10190-1015426262.htm