• 中文核心期刊
  • CSCD来源期刊
  • 中国科技核心期刊
  • CA、CABI、ZR收录期刊

Message Board

Respected readers, authors and reviewers, you can add comments to this page on any questions about the contribution, review,        editing and publication of this journal. We will give you an answer as soon as possible. Thank you for your support!

Name
E-mail
Phone
Title
Content
Verification Code
Volume 29 Issue 1
Jan.  2014
Turn off MathJax
Article Contents
ZHU Xiao-qing, ZHANG Wen-chang, ZOU Zhang-lian, YE Hang, CHEN Guo-fu, ZHUANG Yi-fen. Adipic acid-silica composite phase change materials for thermal energy storage:Preparation and characterization[J]. Fujian Journal of Agricultural Sciences, 2014, 29(1): 17-24. doi: 10.19303/j.issn.1008-0384.2014.01.005
Citation: ZHU Xiao-qing, ZHANG Wen-chang, ZOU Zhang-lian, YE Hang, CHEN Guo-fu, ZHUANG Yi-fen. Adipic acid-silica composite phase change materials for thermal energy storage:Preparation and characterization[J]. Fujian Journal of Agricultural Sciences, 2014, 29(1): 17-24. doi: 10.19303/j.issn.1008-0384.2014.01.005

Adipic acid-silica composite phase change materials for thermal energy storage:Preparation and characterization

doi: 10.19303/j.issn.1008-0384.2014.01.005
  • Received Date: 2013-11-05
  • Publish Date: 2014-01-18
  • This experiment was conducted to study the effect of additives on quality of rice straw silage with conventional and low moisture,which would provide theoretical basis for producing high quality of rice straw silage.Six treatment groups which added fermented green juice(FGJ),glucose(GLU),cellulose(CEL),xylanase(XYL),compound enzyme(CEL+XYL,MIX)respectively and control groups(CON)were set up with conventional moisture(MC1)and low moisture(MC2)of rice straw silage.Each treatment was repeated 3times.The materials were ensiled at room temperature and opened 60days later.The fermentation quality and the chemical composition were analyzed.The results showed:①In the MC2silages,pH,DMR(dry matter reclaim)and WSC(water soluble carbohydrate)extremely significantly increased(P<0.01),and LA(lactic acid),AA(acetic acid)and AN(ammonia nitrogen)significantly decreased comparing with the MC1silages(P<0.05,P<0.01).②In the MC1silages,pH of FGJ,GLU and CEL significantly decreased(P< 0.05,P<0.01),WSC increased among those treatments except the XYL group(P<0.05,P<0.01),AN significantly decreased among those treatments except the CEL group(P<0.01),GLR(gas loss rate)of GLU significantly decreased comparing with the CON group(P<0.01).In the MC2silages,pH of all other five additive treatments significantly decreased(P<0.01),DMR and WSC of FGJ and GLU increased(P<0.05,P<0.01),AN of FGJ,GLU and CEL decreased comparing with the CON group(P<0.05,P<0.01).The results showed that the MC2silages had higher quality than the MC1silages.In the MC1silages and the MC2silages,all five additive treatments had significantly improve the quality of silages,especially the addition of GLU had the better effect both in conventional and low moisture ensiling.
  • loading
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (198) PDF downloads(3) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return